Valoi easy35 110 Holder
The Valoi easy35 110 Holder allows you to scan 110 film that is 16 mm wide and has a frame size of 13 x 17 mm or smaller. The holder fits into the easy35 system
27 €
This product is purchased exclusively for you.
The Valoi easy35 110 Holder allows you to scan 110 film that is 16 mm wide and has a frame size of 13 x 17 mm or smaller. The holder fits into the easy35 system
Reviews
Description
Valoi easy35 110 Holder
The Valoi easy35 110 Holder allows you to scan 110 film that is 16 mm wide and has a frame size of 13 x 17 mm or smaller. The holder fits into the easy35 system just like any other compatible holder - by sliding out the existing holder and inserting this new one.
The dimensions of the port are approximately: 18 mm long and 14.40 mm wide, so you can see the whole frame. Due to the small size of the frame, Valoi cannot guarantee that the whole frame will be seen, but the holder is designed to show as much of the frame as possible, while maintaining good flatness and stability.
Valoi easy35 holders work by feeding the film through a thin slit that goes through the entire holder and out the other side. This way, you can easily push or pull the film all the way through, saving time and effort compared to a traditional clamshell holder.
All Valoi holders use a double S-curve design, where the slit through which the film passes bends before and after the scanning port. By bending the film slightly in one direction on both sides, greater flatness is achieved than would be possible with a straight slit.
Features of the Valoi easy35 110 Holder
- Compatible with 110 film of all frame sizes
- Great flatness of the film
- Shows the entire frame
- Fits into the easy35 system
- Gate width: 14.4 mm
- Gate length: 18 mm
- Double S-curve design for great flatness
- Tight film track of 0.4 mm for improved flatness
- Length: 80 mm
- Width: 60 mm
- Height: 10 mm
- Weight: 26 g
Package contents
- 1x Valoi easy35 110 Holder
Valoi easy35 110 Holder
The Valoi easy35 110 Holder allows you to scan 110 film that is 16 mm wide and has a frame size of 13 x 17 mm or smaller. The holder fits into the easy35 system just like any other compatible holder - by sliding out the existing holder and inserting this new one.
The dimensions of the port are approximately: 18 mm long and 14.40 mm wide, so you can see the whole frame. Due to the small size of the frame, Valoi cannot guarantee that the whole frame will be seen, but the holder is designed to show as much of the frame as possible, while maintaining good flatness and stability.
Valoi easy35 holders work by feeding the film through a thin slit that goes through the entire holder and out the other side. This way, you can easily push or pull the film all the way through, saving time and effort compared to a traditional clamshell holder.
All Valoi holders use a double S-curve design, where the slit through which the film passes bends before and after the scanning port. By bending the film slightly in one direction on both sides, greater flatness is achieved than would be possible with a straight slit.
Features of the Valoi easy35 110 Holder
- Compatible with 110 film of all frame sizes
- Great flatness of the film
- Shows the entire frame
- Fits into the easy35 system
- Gate width: 14.4 mm
- Gate length: 18 mm
- Double S-curve design for great flatness
- Tight film track of 0.4 mm for improved flatness
- Length: 80 mm
- Width: 60 mm
- Height: 10 mm
- Weight: 26 g
Package contents
- 1x Valoi easy35 110 Holder
Specifications
| Info | |
|---|---|
| Article number | 12521878 |
| Info | |
|---|---|
| Article number | 12521878 |
