Phottix Odin II TTL Transmitter Nikon

With the Phottix Odin II TTL Transmitter Nikon you get the most out of your flash setup. This wireless transmitter is compatible with the Nikon i-TTL flash system and equipped with a 2.4 GHz radio system. It can be used to record and activate flash units and strobes in the setup with the original Odin receiver or Mitros + flash at a distance of up to 100 meters.

The transmitter can also be used in a multisystem setup with Odin TTL, Strato and Strato II receivers, as well as Mitros +, Indra360 and Indra500 lamps. An important improvement over the previous model is an expansion of channels and the introduction of the Digital ID, which allows more control over channels 5-32 to prevent interference with other systems. Thanks to TTL communication between the camera and the flash, it is easy to use automatic lighting. Advanced users can set the exact look they need. Using the five groups, users can also control different groups and flashes with different settings and TTL and mix and match manual units. All this is easily accessible via the large LCD screen, along with buttons to adjust the settings.

Additional features include high-speed sync for TTL flash and the patented OverDrive Sync mode for manual studio flash units, allowing users to work with shutter speeds of up to 1/8000 second. Users can also remotely control the modeling light of their Indra TTL flashes and, if necessary, use an AF assist lamp. The receiver has a mini-USB port for firmware updates, as well as a 3.5 mm sync port and a 5 VDC power port. It can also work on two AA batteries.

Features of the Phottix Odin II TTL Transmitter Nikon

• Compatible with Nikon i-TTL
• Works with Odin and Mitros + systems
• 2.4 GHz frequency
• Range: 100 meters
• 32 channels with Digital ID, 5 groups
• Manual, TTL and radio control
• High-Speed Sync & OverDrive Sync
• LCD screen and physical buttons

Package contents

• Phottix Odin II TTL Transmitter Nikon