Pocket Wizard Mini TT1 Control TL Nikon

| Description | Specifications

Regular Price: €279.00

Special Price €155.00

OR
Specially ordered for you

Pocket Wizard Mini TT1 Control TL Nikon

The smallest PocketWizard radio ever, the MiniTT1® Transmitter is part of a new generation of PocketWizard radios providing i-TTL and power control capabilities with Nikon Speedlights and select studio lights. Your creativity also extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities.
The MiniTT1 locks onto the camera’s hot shoe, supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5® Transceivers connected to Nikon CLS / i-TTL flashes or any PocketWizard Receiver for triggering flash or remote cameras.

The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL® System interprets the complex CLS / i-TTL data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the exposure compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system automatically corrects for those changes.
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both i-TTL or manual. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds.
Take advantage of PocketWizard’s HyperSync Technology that allows 1/500th of a second camera sync or more with many camera/strobe set-ups. HyperSync allows you to advance the timing of your flash trigger so that faster than X-sync speeds can be achieved.
Need more speed? Push your ControlTL system beyond 1/500th and go into High Speed Sync / FP mode automatically. With HSS Sync engaged in the camera menu, select any shutter speed you want with your Nikon i-TTL flashes, all the way up to 1/8000th of a second. With radio wireless, the possiblities of FP Sync become a lot more exciting.
Use the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any Paul C. Buff flash.
Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX. Yes, you can intermix i-TTL flash with any manual flash extending your lighting possiblities.
The MiniTT1 works on the powerful ControlTL platform and can be configured via the PocketWizard Utility. The PocketWizard Utility download is provided to support the MiniTT1 via a USB port. The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware.
The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless trigger control.

Specifications:
- TTL Compatibility: Nikon CLS / i-TTL
- Frequency: 340.00 - 354.00 MHz US FCC / IC, 433.42 - 434.42 MHz CE
- Channels: 52 Channels over 26 Frequencies (FCC/IC), 35 Channels over 5 Frequencies (CE)
- Antenna: Internal
- Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
- Range Performance: Up to 800 feet (10 to 240 meters) for CLS / i-TTL triggering depending on flash used, antenna orientation and other variables, Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables
- Mounting: Hot-shoe only
- Maximum Shooting Rate: TTL Mode: within approximately 1 FPS of camera's maximum FPS
- Power / Channel Switch: OFF - C.2 - C.1
- Status Indicator: LED, Green, Amber, Red status indications
- Voltage Present: 3.3 VDC (all pins) - safe for all cameras
- Hot Shoe voltage protection: Hot Shoe: up to 50V
- USB: USB Compliant 2.0, Mini-B Connector
- Construction: High impact plastic, captive battery door, hot shoe made of glass reinforced resin
- Power: 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type
- Battery Life: Hundreds of hours of camera "awake time" depending on shooting habits
- Dimensions: 7.1 cm long x 4.9 cm wide x 3.3 cm tall
- Weight: 65 grams, 57 grams without battery
- Included in the box: MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide
- ROHS Compliant

General
Technical details
Weight & dimensions
Colour
Write a review for Pocket Wizard Mini TT1 Control TL Nikon
Pocket Wizard Mini TT1 Control TL Nikon
Write Your Own Review
Meets expectations
Design
Ease
Functionality
Alternatives to Pocket Wizard Mini TT1 Control TL Nikon
Pocket Wizard Mini TT1 Control TL Nikon

Pocket Wizard Mini TT1 Control TL Nikon

Regular Price: €279.00

Special Price €155.00

MasterCard   American Express   Paypal  VISA  Trusted shops