Nikon Z6 II + FTZ II Adapter

Nikon Z6 II + FTZ II adapter

This bundle includes the Nikon Z6II camera and the FTZ II adapter.

Nikon Z6 II

The Nikon Z6 II is a high-quality system camera that builds on the success of the Z6. This robust and easy-to-use camera gives you the ability to produce professional-quality cinematic videos in 4K quality at up to 60fps. The Z6 II can capture 4K UHD and Full HD images in both the FX and DX image areas, and the HLG recording format provides greater detail, dynamic range and contrast. In addition, you can record 10-bit output via HDMI directly to an external recorder. The two EXPEED 6 processors provide powerful performance, for example when you take many images in succession. For example, the Z6 II supports continuous shooting at a rate of 14 frames per second and a greater maximum number of shots than the Z6, namely 200 JPEG images or 124 12-bit uncompressed RAW images in one burst.
The Nikon Z6 II uses Nikon's Z-mount system, which ensures that light reaches the entire 24.5 megapixel full-frame sensor, creating even higher quality images. Take advantage of a wider dynamic range and focus with absolute accuracy, even in low light. The hybrid AF system has 273 focus points, with eye detection for both people and animals. The Z6 II also features two card slots for UHS-II SD cards in one slot and CFexpress or XQD cards in the other, ideal for optimized workflow and convenient backups. The body of this camera is made of strong, lightweight aluminium alloy with a comfortable, firm grip and it is completely sealed against dust, dirt and moisture. You can charge the Z6 II via USB, but also continue to be supplied with power during recordings with, for example, a power bank.

Nikon FTZ II mount adapter

The second-generation Nikon FTZ II mount adapter makes using an F-mount lens with your Nikon Z camera more comfortable than ever. Improved ergonomics provide plenty of room to comfortably position your fingers when shooting vertically, even when wearing gloves. Whatever F-mount lens you use, there's no loss in image quality and NIKKOR non-Vibration Reduction (VR) lenses will find new levels of sharpness.*

(*The FTZ II mount adapter works with a total of approximately 360 F-mount lenses, including 94 AF-S, AF-P or AF-I types and full AF/AE capabilities have.)

Autoexposure shooting is enabled for hundreds of F-mount lenses. F-mount lenses with a built-in autofocus motor maintain full autofocus capabilities.**

(**Full AF/AE is supported when using FX or DX AF-S Type G/D/E, AF-P Type G/E, AF-I Type D and AF-S/AF-I teleconverters.)

When using an F-mount lens with VR, in-lens yaw-and-pitch detection is complemented by in-camera roll detection. And when you shoot with a lens without a VR F-mount, yaw, pitch and roll are corrected in-camera. Seamless in more than just operation. The FTZ II mount adapter is finished with a leather-coloured lacquer, smoothly combining the look of your F-mount lens with the adapter and with your Nikon Z camera.

A dust and drip resistant construction with rubber gaskets for lens and camera connections, as well as buttons and levers. The sturdy, lightweight magnesium alloy cylinder means you're always ready to go.

Nikon Z6 II Features

• Full frame system camera
• 24.5 megapixel FX format BSI CMOS sensor
• Completely new Z-mount
• 5-axis in-body image stabilization with 5.0 stops
• 273-point autofocus system
• Electronic viewfinder with 3.6 million dots
• 4K UHD at 30fps / Full HD at 120fps
• 3.2" tilting touchscreen
• SnapBridge and Wi-Fi
• Dimensions: 134 x 100.5 x 67 mm
• Weight: 675 grams

Features of the Nikon FTZ II mount adapter

• Nikon original lens mount adapter
• Makes using an F-mount lens with your Nikon Z camera more comfortable than ever
• Expand the repertoire of your Nikon Z camera with F-mount lenses
• One mount. Endless inspiration
• A world of NIKKOR lenses. Many possibilities
• No loss of image quality
• Dust and drip resistant construction with rubber seals
• Material: magnesium
• Weight: 125 grams

In the Box:

• Nikon Z6 II
• BF-N1 body cap
• DK-29 rubber eyecup
• EN-EL15c rechargeable battery
• MH-25a battery charger
• HDMI/USB cable clamp
• AN-DC19 belt
• UC-E24 USB cable
• BS-1 cover
• Nikon FTZ II mount adapter
• Body cap BF-1B
• Rear lens cap LF-N1