Pocket Wizard AC3 ZoneController Canon
List price 99,99
31,-
Delivered within 2 to 3 working days
Reviews
Description
Pocket Wizard Zone Controller Canon
The AC3 Zone Controller provides wireless remote control of multiple flash setups. With this unit you can, from distance, control three independent zones and flash setups. The Zone Controller gives the photographer the freedom to independently control the flash output regardless whether the photographer is working in E-TTL or Manual mode. The Zone Controller is smaller than the MiniTT1 and is slid into the hot shoe of the MiniTT1 or FlexTT5. By making use of the Control-TL "language", the zone controller can communicate with a remote FlexTT5 which is coupled to a flash unit. Each remote FlexTT5 is controlled independently, based on the group or zone (A, B, C) where it is linked.
With the three knobs on the zone controller, it is possible to adjust the zones - A B C - individually. This may be done in steps of 1/3 f-stop with a total range of 6 f-stops (+3> -3 f-stop) when using the flash in manual mode. If the flash is set to TTL, then adjust the amount of flash light is controlled by the Zone Controller, independently of each target zone.
The three switches on the top allow the photographer to switch between TTL-Auto, manual or dis-engage zones. For power the Zone Controller uses a small amount of power from the MiniTT1 or FlexTT5 unit to which it is linked.
The Zone Controller is also compatible with studio strobes, enabling them to create up to 3 different zones, that is if the studio flash is connected to the FlexTT5 or MultiMax.
Pocket Wizard Zone Controller Canon
The AC3 Zone Controller provides wireless remote control of multiple flash setups. With this unit you can, from distance, control three independent zones and flash setups. The Zone Controller gives the photographer the freedom to independently control the flash output regardless whether the photographer is working in E-TTL or Manual mode. The Zone Controller is smaller than the MiniTT1 and is slid into the hot shoe of the MiniTT1 or FlexTT5. By making use of the Control-TL "language", the zone controller can communicate with a remote FlexTT5 which is coupled to a flash unit. Each remote FlexTT5 is controlled independently, based on the group or zone (A, B, C) where it is linked.
With the three knobs on the zone controller, it is possible to adjust the zones - A B C - individually. This may be done in steps of 1/3 f-stop with a total range of 6 f-stops (+3> -3 f-stop) when using the flash in manual mode. If the flash is set to TTL, then adjust the amount of flash light is controlled by the Zone Controller, independently of each target zone.
The three switches on the top allow the photographer to switch between TTL-Auto, manual or dis-engage zones. For power the Zone Controller uses a small amount of power from the MiniTT1 or FlexTT5 unit to which it is linked.
The Zone Controller is also compatible with studio strobes, enabling them to create up to 3 different zones, that is if the studio flash is connected to the FlexTT5 or MultiMax.
Specifications
Info | |
---|---|
Article number | 12174989 |
Info | |
---|---|
Article number | 12174989 |